Finishing Putty 10kg TS'IATS'AN
Product number:
00-00000819
Article: 6975
Article: 6975
INNOTEK - Tsiachan
Finishing putty is used before decorative finishing to fill small cracks and irregularities on walls and ceilings. Made from chalk powder and polymer additives. Recommended for use in dry areas. Surface preparation: dry, solid, cleaned from paint, oil, and dust. Highly absorbent surfaces should be primed; weak and crumbly surfaces cleaned with metal brush. Preparation: for 1 kg putty, add 0.45 liters of room temperature water, mix until uniform, rest 3-5 minutes, mix again and use within 20 minutes. For filling holes and cracks reduce water, for plastering increase. Applied layer thickness: 0.3-3 mm. Coverage: 1.2 kg covers 1 m² at 1 mm thickness. Application: use metal spatula; fill cracks and holes first, then spread and smooth thinly. The finishing layer removes fine irregularities and usually does not require full sanding. Storage: keep in dry place.
Origin Country: Armenia
AMD 2,200.00 / piece