Finishing Putty 30kg Ts'iats'an
Product number:
00-00002867
Article: 3077
Article: 3077
INNOTEK - Tsiachan
Finishing putty is used before decorative finishing to fill small cracks and irregularities on walls and ceilings. It is made from chalk powder and polymer additives. Recommended for use in dry areas. Surface preparation: the surface must be dry, solid, and free from paint, oil, and dust. Highly absorbent surfaces should be primed, and weak or crumbly surfaces cleaned with a metal brush. Putty preparation: for mixing 1 kg of putty, pour 0.45 liters of room temperature water into a container, mix with a mixer or by hand until uniform, let rest for 3-5 minutes, then mix again and use within 20 minutes. For filling holes and cracks, reduce water amount; for plastering, increase it. Applied layer thickness: 0.3-3 mm. Coverage: 1.2 kg mixture covers 1 m² at 1 mm thickness. Application: use a metal spatula to fill cracks, holes, and irregularities, then spread and smooth the putty in a thin layer. The finishing layer removes the finest irregularities and usually does not require full sanding. Storage: keep in a dry place.
Origin Country: Armenia
AMD 5,400.00 / piece