Gypsum Putty 25kg Ts'iats'an
Product number:
00-00002872
Article: 8453
Article: 8453
INNOTEK - Tsiachan
Gypsum putty is intended for interior finishing work, plastering concrete and brick walls and ceilings inside buildings. It is used on surfaces to be painted or wallpapered. Recommended only for dry and clean surfaces. Not recommended for floor leveling, surfaces under tile, or high humidity areas. Surface preparation: dry, solid, cleaned from oil, paint, and dust. Moist surfaces including concrete must be primed. Putty preparation: add 0.4 liters of water per 1 kg powder, mix evenly, use after 5 minutes. Reduce water for filling holes and cracks, increase for plastering. Applied layer thickness: 0.5-5 mm. Coverage: about 1 m² per 1 kg at 1 mm thickness. From 25 kg (1 bag) about 30 liters of ready mix is obtained. Application: apply with a spatula. Fill large cracks or holes with putty, then plaster after drying. Smooth with sponge or cloth. Final finishing with sandpaper after drying.
Origin Country: Armenia
AMD 3,300.00 / piece